Webscorer PRO 6.0 (and later) supports MyLaps decoders and chips. The following decoders are supported using the MyLaps P3 protocol:BIB Decoder
BibTag Decoder
AMBrc Decoder
AMBmx3 Decoder
RC4 Decoder
TranX3 Decoder
ChipX Decoder
ProChip Decoder
X2 Decoder [More]
It is now possible to program RFID chips using the same reader and antenna you use for timing the race. [More]
Webscorer PRO 4.8 adds a new option to send an email to each racer within seconds of finishing the r [More]
Webscorer PRO v4.8 now supports also the active chip timing with Race Result hardware. Active chips have a battery whereas passive (RFID) chips do not. [More]
Webscorer PRO v4.8 adds support for a photocell from Cronopic that can be connected directly to the timing device via Bluetooth. [More]
This article explains the hardware components recommended for chip-timing with Webscorer PRO, including pricing and links to AtlasRFIDstore to view hardware details.[More]
The Webscorer PRO app is now available for laptops, desktops and tablets running Windows 10 as well as Mac computers running macOS Catalina (version 10.15 or later). [More]
Webscorer PRO 4.0 adds support for the external NFC reader by Advanced Card Systems Ltd. model ACR-1 [More]
Read this article to learn how to keep the Webscorer app running in the background when the Android 7+ device goes to sleep - either on its own, or when the screen is turned off by the user. Chip detections will happen without the app visible. [More]
Webscorer PRO supports external timers from the following vendors:
ALGE-TIMING - http://www.alg [More]
Step-by-step instructions how to setup Webscorer PRO software for RFID chip timing.[More]
The new LLRP chip-timing support in Webscorer PRO 2.1 was thoroughly tested at the 2nd biggest cyclo [More]
Until now, Webscorer PRO has been purely a manual-timing product - you'd tap the screen to record a[More]
Until now, Webscorer PRO has been purely a manual-timing product - you'd tap the screen to record a[More]
Until now, Webscorer PRO has been purely a manual-timing product - you'd tap the screen to record a[More]